August 05, 2021, 07:26:39 AM

Author Topic: Arrow Setup For Elk  (Read 856 times)

0 Members and 1 Guest are viewing this topic.

Offline 765mustang

  • Newbie
  • *
  • Posts: 1
    • View Profile
Arrow Setup For Elk
« on: January 26, 2021, 10:52:00 AM »
Hey all,


I am going on my first archery elk hunt this upcoming fall and need to upgrade my arrows. I  am shooting at a 30" draw length with 70lb draw. Any recommendations as far as arrows, broadheads (weight), fletchings etc. would be greatly appreciated. Thanks

Offline nclonghunter

  • Big Bull
  • ****
  • Posts: 681
    • View Profile
Re: Arrow Setup For Elk
« Reply #1 on: January 26, 2021, 02:15:04 PM »
This is like asking a bunch of cooks how to make the best chili. Each one will have their own recipe.
My suggestion is keeping the rear of shaft as light as possible (Vanes or feathers). At you arrow length and poundage you will need a stiff shaft. The shaft's spine can and will differ depending on how much point weight you shoot.
Broadheads should be super sharp and sturdy in construction.


I shoot 65# and 30" arrow. My arrows are 250 Black Eagle Carnivore with 4 blazer vanes. I have 200 grain Ethics Archery steel inserts and shoot 125 grain Slick Trick Standards. This gives me a total arrow weight of 650 grains. This is a heavy arrow with high FOC.


This arrow also accomplishes the weight that Dr. Ed Ashby considers the bone breaking threshold. He also recommends single bevel broadheads. Troy Fowler that hosts Wray Ranch Fairy on Youtube and has many vids on heavy arrow builds. Watch them and decide if that is the recipe you want.


You may want to go with a lighter arrow and lighter point weights. Plenty of animals are taken with these arrows every year. Just dont go too light looking for high speed and super flat shooting arrows.


For several years I shot a 100 grain brass insert and 125 grain broadhead and had pass throughs and killed elk with it. I went heavier because I like the extra odds of still getting lethal kills "if" hitting heavy bone. Hitting heavy bone is not what you want to do but it can happen. It has happened to me twice using lighter arrows and I got two inches of penetration and no elk.


Hopefully you will get other opinions and options. Lots of info and choices. Good Luck on finding your arrow.



If wisdom is the reward for aging, I will always be young

Offline jstephens61

  • Satelite Bull
  • ***
  • Posts: 466
    • View Profile
Re: Arrow Setup For Elk
« Reply #2 on: January 28, 2021, 12:19:41 PM »
Shoot the setup thats tunes perfectly out of your bow.
For me with a 29 1/2 draw, 70#, its a 27 3/8 5mm 340 FMJ. Three Blazer vanes, standard insert and a 100 grain VPA vented head.
This has been a deadly combination for me for a few years now.
Good luck with your quest.
What doesn't kill you, hurts like hell.

Offline Western Bowman

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Arrow Setup For Elk
« Reply #3 on: March 17, 2021, 06:47:42 PM »
I used the easton axis 5mm (10.7 gpi)  300 spine and 125grain broadheads and loved them but if you are looking for something that packs more punch I suggest the easton FMJ 5mm (12.0 gpi) 300 spine also with a 125 grain tip. Both will get the job done. Also if you are getting down to the nitty gritty Gold Tip has a FOC calculator that is very helpful.
 https://www.goldtip.com/Resources/Calculators/FOC-Calculator.aspx
Western Bowman,
Silent | Stealthy | Successful

 

Recent Posts

Re: Questions on Clothing by Back_Country
[July 29, 2021, 12:20:56 PM]


Re: Seeking Montana Archery Tag help. by 406sapper
[July 27, 2021, 02:59:05 PM]


Re: Questions on Clothing by montanaelk31
[July 25, 2021, 10:55:32 AM]


Re: Questions on Clothing by cohunter14
[July 21, 2021, 07:35:55 AM]


Questions on Clothing by Samc1998
[July 20, 2021, 05:15:36 PM]